Zeorich wallputty

Available in

WEIGHT
  • 40

    KG

  • 00

    KG

  • 00

    KG

COLOR

  • check

  • check

PACK

  • check

40
Product Coverage Calculation
Download Technical Datasheet
Download Brochure

Advantages of Using Water Resistant Wall Putty
from Best Wall Putty Company over traditional putty or cement-based putty

Admix for mortar

In Compliance With
EN & HDB (Singapore) norms 

India's Best Wall Putty Company Wallnut which is known for his product Zeorich Wall Putty which is eco-friendly, extra-fine, lightweight, non-water curing, high strength, water resistance, shrinkage less, mineral-based premium wall putty made from natural raw material to create smooth, glossy, and extreme white surfaces before any paint application on wall and ceiling. Zeorich Wall Putty also can be used as a final surface without any paint application in interior areas. Suitable for interior & exterior

Hi-Tech Features

Pure white cement-based wall putty for walls & ceiling up to 3mm thickness.

Wallnut High-performance technology
abrasion
Wallnut Waterproof
Low Voc
  • Very high tensile adhesion.
  • Imported German polymer for extra strength and long life.
  • High compressive, abrasion-resistant
  • Water-Resistant
  • Best for internal & external areas before paint application.
  • Economic & best value using Zeorich Wall putty of superior class with no match. Very low VOC and suitable for green building.
Wallnut Pure White
No Water Curing
Wallnut Extra Gloss
covergae
  • Pure white colour for a premium finish.
  • Extra fine carbonates and additives for a smooth finish and seamless application.
  • No water curing required
  • High gloss once the final surface is ready for paint application.
  • High coverages and maximum spread.
  • Easy to mix and apply.
  • Manual or machine mix possible.

Suitable Areas for Wall Putty

Internal & external walls & ceiling.

Industrial facility.

Residential & commercial buildings.

Public infrastructure projects.

How to Use Zeorich Wall Putty

Suitable surfaces
Suitable covering material
Surface Preparation
Mixing
How to apply

New or old fully dry and sound plasters.
Smooth & levelled concrete surface.
Drywalls, cement board surfaces.
Gypsum based plaster
Plaster of Paris (POP), or similar high absorbent surfaces. (Apply Zeorich primer before putty application)

Primer & Paint of all types.
Other suitable coatings of PU or Epoxy

Ensure that the surface is sound, clean, and free from all foreign material such as oil, grease, dust etc.
In case working on the external surface, avoid applying putty on a hot surface. First, let cool the surface with water spray or using a wet sponge.
The hot surface may compromise the final performance of zeorich wall putty
In case of high absorbent surfaces such as gypsum plaster or AAC block, before starting the application, first, apply the Zeorich Primer or similar to reduce the absorption of surfaces. Consult India's Best Wall Putty Company Wallnut technical representative for any information before application if required.

Mix Wallnut Zeorich wall putty with clean water by 40 % or more by weight. Use slow speed electric stirrer for mixing to have desired results. Manual mixing if not done properly may compromise final results. Mix thoroughly to obtain smooth slurry paste for application.

Adjust the water quantity as per ambient temperature and dryness of the surface. The final mix must be a workable slurry paste.

Spread the wall putty onto the surface and apply the first coat at a minimum thickness of 1.5 mm to achieve a stable base.

Once 1st coat is dried (minimum 5-6 hours at normal temperature), apply the second coat not more than 1.5 mm.

Leave the final surface to dry for a minimum of 48 to 72 hrs. before starting the paint application. Once the surface is fully dry and ready, paint application can be carried out as desire.

Keep in Touch

Get in touch for business and product acquisitions enquiries.

For Enquiries
91-22-49713322
91-9967007783

Email
info@wallnut.co.in

Web Enquiry
wallnut footer
Tags