Zeoclean Power Tile Cleaner is a high-performance tile and grout cleaning solution that removes tough stains, grease, cement residue, and deep-seated dirt from ceramic, vitrified, porcelain, and mosaic tiles.
What Makes Power
Stand Out
Deep-penetrating formula for restoring dirty grout joints and discoloured tile surfaces — removes embedded dirt, grease and stubborn staining from grout lines and tile pores.
Powerful active formula penetrates deep into grout joints and textured tile surfaces to break down stubborn dirt, grease, and grime buildup.
Effectively removes cement residue, hard water marks, soap stains, and accumulated floor dirt from tiles and grout areas.
Specially developed for cleaning tile joints, bathroom tiles, kitchen surfaces, and high-traffic flooring where regular cleaners fail.
Delivers intensive cleaning performance while remaining suitable for ceramic, vitrified, porcelain, and mosaic tile surfaces.
Helps revive dull and dirty tiles by removing deep-seated stains and restoring a cleaner, brighter surface appearance.
Ideal for residential homes, offices, malls, restaurants, washrooms, and commercial tile maintenance applications.
ARegular use helps maintain tile hygiene, reduces grime buildup, and keeps tiled surfaces looking cleaner for longer.
Before replacing tiles or redoing grout joints, use ZeoClean Power to refresh old surfaces and improve overall tile appearance.
Technologies
Reaches embedded dirt in porous grout joints
Designed specifically for grout joint restoration
Restores original grout colour and appearance
Strong formula for periodic deep cleaning
Where Power Performs
Restoring discoloured or darkened tiles and Floor
Works best in bathroom & kitchen for Deep Cleaning where it matters the most
Factory, Restaurant Kitchen floor and wall deep cleaning
Regular deep-cleaning maintenance for commercial tile areas
Restoring tile appearance before property sale
Restoring tiles before deciding whether renovation is needed
How to Use Power
- Sweep or vacuum floor to remove loose dirt first
- Pre-wet the tile area with clean water
- Identify badly stained joints for concentrated treatment
- Ensure ventilation in the area
- Dilute Power 1:5 to 1:10 depending on soil level
- Apply to grout joints with brush, sponge or mop
- For concentrated grout treatment: apply neat along joint lines with brush
- Allow 5–10 minute dwell time
- Scrub grout joints firmly with a stiff grout brush
- Work in small sections for best results
- Dwell time plus agitation lifts embedded dirt
- Add more Power if joint is very heavily soiled
- Rinse thoroughly with clean water — use mop and bucket
- Multiple rinses to completely remove Power and loosened dirt
- Check joints are clean — repeat treatment if needed
- Final rinse with clean water
- After Power deep clean, use ZeoClean Dayna daily to maintain
- Deep cleaning needed less frequently when maintained properly
- Annual deep clean with Power in high-traffic areas
Ideal working temperature +5°C to +35°C. Avoid direct sunlight and extreme temperatures during application.
Always ensure the substrate is clean, dry and structurally sound before application.
Lift a tile to verify adhesive coverage — minimum 65% floor, 80% exterior and wet areas.
Mix only what can be used within the pot life. Do not add water to extend working time.
Test on small area first. Avoid use on polished marble — use ZeoClean Marmo. Rinse thoroughly after use. Do not mix with other cleaning products.
Technical Data
Coverage varies with substrate condition, tile format and application method. Use our Product Calculator for exact estimates per project.
🧮 Open Calculator →More from Zeoclean
DailyUse Dayna daily after Power deep clean for ongoing maintenance
View Product →
Cement
SealerAfter Power deep cleaning, seal natural stone with Zeoseal Porous
View Product →Ready to Build
with the Best?
Download the Technical Data Sheet, use our product calculator, or speak to our technical team for project-specific advice.