The most powerful Zeoclean — concentrated formula specifically removes dried epoxy grout haze, paint splashes and stubborn construction residues from tiles after installation.
What Makes Max
Stand Out
The most powerful ZeoClean — concentrated formula specifically removes dried epoxy grout haze, paint splashes and stubborn construction residues from tiles after installation.
Specifically formulated to remove the most stubborn epoxy grout haze — the hardest construction residue to remove from tiles.
Removes paint splashes, emulsion drips and decorating residue from tile surfaces after construction.
Highly concentrated — small amount achieves maximum results. One litre cleans large tile areas efficiently.
Designed for the post-installation cleanup challenge — after grouting, painting and fitting out.
Works on ceramic, vitrified, porcelain and unglazed tiles — versatile across all standard tile types.
Fast-acting formula — short dwell time achieves excellent results without prolonged scrubbing.
Formulated to remove residue without damaging the tile surface — safe on most glazed and vitrified surfaces.
Professional concentration — use diluted or neat depending on severity of contamination.
Technologies
Removes dried epoxy haze — the hardest post-install residue
High concentration — efficient cleaning with less product
Specialist post-grouting and post-painting cleanup
Short dwell time for efficient site cleaning
Where Max Performs
Removing epoxy grout haze after Metapoxy or Epoxy Grout installation
Removing paint splashes from tile surfaces after decoration
General post-construction residue removal from all tile types
Large commercial tile installations with multiple residue types
Renovation sites with accumulated mixed construction residues
Removing pool tile installation residues before filling
How to Use Max
- Wear PPE — gloves, eye protection and face mask
- Ensure adequate ventilation — open windows and doors
- Test on small area first — powerful formula
- Do NOT use on polished natural stone, marble or limestone
- Light residue: dilute 1:5 with water
- Medium residue: dilute 1:3 with water
- Heavy epoxy haze: apply neat or 1:1 dilution
- Start with diluted application and increase strength if needed
- Apply to dry tile surface with brush, mop or spray
- Allow to dwell for 5–15 minutes depending on residue severity
- Agitate with stiff brush or scrubbing pad
- Do not allow to dry on tile surface during treatment
- Rinse thoroughly with copious clean water
- Ensure all product is removed
- Second rinse to confirm complete removal
- Check tile surface is clean and residue-free
- Inspect grout joints after cleaning — strong acid can affect some grouts
- If grout joint is affected, re-grout the affected area
- Apply sealant to natural stone tiles after cleaning if required
Ideal working temperature +5°C to +35°C. Avoid direct sunlight and extreme temperatures during application.
Always ensure the substrate is clean, dry and structurally sound before application.
Lift a tile to verify adhesive coverage — minimum 65% floor, 80% exterior and wet areas.
Mix only what can be used within the pot life. Do not add water to extend working time.
NOT safe on marble, polished limestone or acid-sensitive surfaces. Wear full PPE. Test on small area. Rinse thoroughly after use. Ventilate area well.
Technical Data
Coverage varies with substrate condition, tile format and application method. Use our Product Calculator for exact estimates per project.
🧮 Open Calculator →More from ZeoClean
Cement
Deep CleanZeoclean Power for ongoing daily cleaning of tiles and floor.
View Product →
GroutThe tap and Sanitary cleaner for sparkling clean bathroom.
View Product →Ready to Build
with the Best?
Download the Technical Data Sheet, use our product calculator, or speak to our technical team for project-specific advice.