pH-neutral formula safe for marble, granite and all polished natural stone — will not etch, dull or damage sensitive surfaces. The only safe choice for natural stone cleaning.
What Makes Marmo
Stand Out
pH-neutral formula safe for marble, granite and all polished natural stone — will not etch, dull or damage sensitive surfaces. The only safe choice for natural stone cleaning.
Precisely balanced pH-neutral formula — will not cause acid etching or alkali damage to marble, limestone or polished stone.
Acidic cleaners permanently etch and dull marble. Marmo is the only safe choice for natural stone cleaning.
Neutral pH preserves the polish and reflectivity of honed and polished stone — no dullness or surface damage.
Safe on all natural stone — marble, granite, travertine, limestone, onyx, slate and engineered stone.
Gentle enough for daily maintenance yet effective for periodic deeper cleaning of stone surfaces.
Eco-friendly neutral formulation — biodegradable surfactants safe for the environment and drain disposal.
Rinses cleanly with no streaking or residue — maintains the clarity of polished stone surfaces.
Suitable for residential marble floors as well as commercial stone installations.
Technologies
Balanced pH — no etching or dullness on sensitive stone
The only Wallnut cleaner safe on marble and limestone
Maintains stone polish and reflectivity
Biodegradable formula — safe for environment and drains
Where Marmo Performs
Cleaning and maintaining polished marble floor installations
Granite countertops, vanity tops and floor applications
Travertine tiles and stone surfaces
Highly polished porcelain where acid cleaners may cause micro-damage
Kitchen and bathroom stone countertop cleaning and maintenance
High-end hotel lobby and suite marble maintenance
How to Use Marmo
- Dilute 1:20 with water for daily mopping
- Apply with mop, cloth or spray
- No dwell time required — clean as you go
- Rinse with clean water if required
- Dilute 1:10 with water for deeper cleaning
- Allow 2–5 minute dwell time
- Agitate with soft cloth or soft-bristle brush
- Rinse thoroughly with clean water
- Spray diluted Marmo directly onto countertop surface
- Wipe with microfibre cloth in direction of stone grain
- Rinse with damp cloth
- Polish dry with clean dry cloth for best result
- Use diluted Marmo for maintenance of sealed stone
- Neutral pH will not break down most stone sealants
- For unsealed stone, clean then apply Zeoseal Porous sealer
- Regular Marmo cleaning maintains stone appearance
- Always pre-test on inconspicuous area
- Rinse off — do not allow to dry on stone
- For metallic fixtures, rinse immediately after contact
- Store away from heat and direct sunlight
Ideal working temperature +5°C to +35°C. Avoid direct sunlight and extreme temperatures during application.
Always ensure the substrate is clean, dry and structurally sound before application.
Lift a tile to verify adhesive coverage — minimum 65% floor, 80% exterior and wet areas.
Mix only what can be used within the pot life. Do not add water to extend working time.
Even pH neutral cleaners should be rinsed off stone. Do not allow to dry on polished surfaces. For post-installation cement haze on stone, use Advance but dilute heavily and rinse immediately.
Technical Data
Coverage varies with substrate condition, tile format and application method. Use our Product Calculator for exact estimates per project.
🧮 Open Calculator →More from ZeoClean
DailyDaily maintenance cleaner — safe on all tile types including stone
View Product →
SealerSeal and protect stone after cleaning with Zeoseal Porous
View Product →
HazeReady to Build
with the Best?
Download the Technical Data Sheet, use our product calculator, or speak to our technical team for project-specific advice.