Product Calculator | Wallnut Building Solutions
Tools & Resources

Product
Calculator

Instantly calculate how much adhesive, grout, screed or putty you need — enter your project dimensions and get accurate quantity estimates in seconds.

Home Tools & Downloads Product Calculator
Zeorich Series
Screed Calculator

Calculate Zeorich Base + Zeorich Basalt quantities for floor screeds. Select your mixing ratio, enter area and required thickness.

Zeorich Base
Zeorich Basalt
Square feet (sq. ft.)
mm — Minimum 20mm
Screed Calculation Results
Zeorich Base + Zeorich Basalt quantities
Zeorich Base (kg)
Zeorich Basalt (kg)
Total Mix (kg)
Base 20 kg Bags
Basalt 50 kg Bags
Coverage (sft/kg)
ℹ️Coverages are approximate. Final quantities depend on site conditions, levelling, wastage and actual thickness applied. Always order 5–10% extra as buffer.
Zeorich Series
Floor Hardener Calculator

Calculate Zeorich Base HD consumption for heavy-duty, medium-duty or light floor applications.

Zeorich Base HD
Square feet (sq. ft.)
Applied thickness in mm
Floor Hardener Results
Zeorich Base HD 20 kg bags required
kg per m²
Total kg Required
20 kg Bags
ℹ️Coverage is approximate. Zeorich Base HD 20 kg pack. Add 5–10% for wastage. Heavy duty: 6–7 kg/m², Medium: 4–5 kg/m², Light: 2–3 kg/m².
Calcibond & Lite Series
Tile Adhesive Calculator

Select your adhesive product, enter surface area and bed thickness to calculate bags required.

Lite Tile
Calcibond Smart
Calcibond Ultima
Square feet (sq. ft.)
mm — notch trowel bed thickness
Tile Adhesive Results
Total kg Required
Bags Required
sft / kg coverage
ℹ️Coverage based on stated thickness and product density. Actual site consumption may vary due to surface conditions, tile back profile and wastage. Order 10% extra as buffer.
Connect & Lock Series
Grout Calculator

Enter tile dimensions, joint width, total area and grout type to calculate exact grout quantity required.

Lite Grout
Metapoxy
Epoxy Grout
mm
mm
mm
mm
Square feet (sq. ft.)
Grout Calculation Results
Coverage (sft / kg)
Total kg Required
Bags / Buckets Required
ℹ️Formula: (L+W)/(L×W) × tile thickness × joint width × density → coverage = (10.76 / result) × 0.95 sft/kg. Densities: Lite Grout 1.75, Stucco 1.70, Epoxy 1.45, Crystal/Metapoxy/Luster/Admix 1.40.
ZeoClean Series
Cleaners Guide

Coverage for cleaners depends on surface type, dilution ratio, stain severity and application technique. Select the right product for your need.

ZeoClean Power
ZeoClean Power

Concentrated tile cleaner for daily use — removes general dirt, grime and light stains from all tile surfaces.

Daily maintenance use
ZeoClean Advance
ZeoClean Advance

Heavy duty cleaner for removing hard stains — cement haze, construction dirt, efflorescence from tile surfaces.

Heavy duty cleaning
ZeoClean Marmo
ZeoClean Marmo

Neutral cleaner for marble, granite and quartz stone — pH-neutral formula safe for sensitive polished surfaces.

Marble & natural stone
ZeoClean Dayna
ZeoClean Dayna

Heavy duty cleaner for CP fittings and sanitaryware — removes scale, rust stains and soap deposits effectively.

CP fittings & sanitaryware
ZeoClean Max
ZeoClean Max

Removes epoxy grout haze, PU, paint stains and residue — powerful formula for post-installation cleanup.

Epoxy haze & paint remover
Zeoseal Porous
Zeoseal Porous

Penetrating sealer for all porous natural stone — approx. 50–125 sq.ft./litre per coat (depends on surface absorption).

50–125 sft/Lt per coat
💡

Coverage for cleaners depends on surface area, dilution ratio, type of stain and application technique. For exact quantities, contact our technical support team.

Zeorich Series
Wall Putty Calculator

Calculate Zeorich Wall Putty (Pure White 40 kg) quantity for walls and ceilings.

Zeorich Wall Putty
Square feet (sq. ft.)
mm — Maximum 3mm per coat
Wall Putty Results
Zeorich Wall Putty 40 kg bags
Total kg Required
40 kg Bags
sft / kg
ℹ️Zeorich Wall Putty — pure white, cement-based, up to 3mm thickness. Coverage approx. 18–22 sq.ft. per kg at 1mm. Final coverage depends on wall surface, absorption and smoothness.
How to Use

4 Steps to Your Estimate

1
Select Product Type

Choose from Screed, Hardener, Adhesive, Grout, Cleaners or Wall Putty on the left.

2
Enter Dimensions

Input your surface area in square feet, tile size, bed thickness and any other required parameters.

3
Click Calculate

Instantly see total kilograms required, number of bags and coverage rate for your project.

4
Order with Confidence

Always add 5–10% buffer for wastage. Contact us for bulk orders or technical queries.

Need Help Choosing
the Right Product?

Our technical team can recommend the exact product for your substrate, tile size and application.