Connect & Lock

Luster Grout

Two-component Epoxy Grout in a variety of jewels to provide glittering effects between tiles & stone joints up to 10 mm on the floor and on a wall.

Luster

Available in

WEIGHT
  • 4

    KG

  • 01

    KG

  • 00

    KG

COLOR

  • check

  • check

  • check

PACK

  • check

Product Coverage Calculation
Download Techinical Datasheet

Why Luster grout is the best choice for all modern grouting work

CL Luster Logo

In Compliance With
EN norms - RG (Reactive Grouts)

Wallnut Connect & Lock advance technology Luster Grout is consisting of high-quality transparent glass beads, eco-friendly resin & hardener & extra shiny premium hexagonal glitter beads. The grout provides excellent workability and ease of work for the DIY job and high-quality shining in gold, silver & copper shades between tiles & stone joints. Connect & Lock Luster Grout doesn’t allow water to go through and can be used for filling the tile & stone joints up to 10 mm on floors & on walls. Best for interior use. External under shade.

Hi-Tech Luster Features

Wallnut High-performance technology
Wallnut Extra Gloss

Very high compressive strength and no debonding from joint. Durable and long-lasting.

  • Smooth and shiny flush joints between tiles & stone.
  • Permanent locking of colour between joints
shiny
17

High quality extra shiny polyester glitter in Gold, Silver & Copper.

Advance technology ready to use epoxy base crystal grout in jewels form, which requires very short time for mixing and application.

Suitable Areas

All kinds of bathrooms including public showers.

Commercial and industrial floors.

Commercial and Industrial Kitchens.

All kinds of small & public swimming pools including sauna’s & spas.

All kinds of small & public swimming pools including sauna’s & spas.

Public restaurants & cafeterias.
Laboratories & other chemical research facilities.

How to use

Suitable Grouting material
Surface Preparation
Mixing
How to apply & cleaning
Luster grout benefits

  • All types & sizes of glazed, ceramic & vitrified tiles.

  • All types & sizes of natural and engineered stone.

  • All types & sizes of ceramic & glass mosaic.

  • Large-format tiles of all types including low thickness slabs.

  • Tiles & mosaic in metal form.

  • First, check that tiles or stones are fixed properly and are not sounding hollow. In case sounding hollow, The first repair or replace the area.

  • Ensure that joints are clean and free from all foreign material such as oil, grease, dust etc. In case the dust or cement particles are stuck inside the joint, use a vacuum cleaner or blower to remove the same. The grout remover tool also can be used in case old grout to be removed.

  • In case the surface of tiles or stone is absorbent, then before starting the application, first apply the grout in a small test patch area. In case of discolouration of surface, apply first Zeoseal Porous Sealer or consult Wallnut technical representative.

  • In case tiles or stone are rustic in nature and have uneven surfaces, it is possible that grout residue may remain on the surface and difficult to fully clean. In this case, better not to apply grout on the entire surface area. Also, if needed, edges of tiles or stone can be masked by applying suitable masking tape and can be removed post-cleaning of grouts.

Mixing Ratio: Part A-Hardener: Part B-Color resin paste: (1:14)

  1. Mix part A and Part B in full quantity in any plastic bucket by using a slow-speed electric stirrer. Mix until smooth & uniform paste is obtained for application.

  2. In case part quantity of grout is mixed, it is advisable to use strictly the correct ratio of Part A-hardener & Part B-resin color paste (1:14). For taking the correct ratio of hardener, a measurement jar or hardener bottle cap can be used. (In case of Part A mixing ratio are not correct, the final result may vary and grout performance can be compromised.)

  3. Use the mixed material within 15 to 45 minutes (Depending on ambient temperature) before it starts setting in the bucket.

  • Before applying the grout on an overall surface of tiles or stone, test the small area for any discolouration due to absorbency in tiles or stone surfaces.

  • In case tiles or stone surface is rough or uneven, it is advisable to apply the grout only in the joints and not on the entire surface of tiles or stone to avoid cleaning issue. (A good masking tape also can be used if needed on the edges.)

  • Spread the grout evenly on the surface of tiles or stone to cover the area.

  • Once the grout is spread, fill the joint completely using a rubber grout float. Keep the rubber float diagonally to the joint and

    apply a 45-degree angle to have a perfect filling.

  • Once all the joints are filled properly, remove excess grout if any from the surface of tiles or stone.

  • To achieve a flush joint, leave the grout approx. 30 to 45 minutes (Depending on temperature) in the joints. (Immediate

    cleaning of grout is possible, but it may lead to uneven grout surface finish).

  • Pour clean water over the tile or stone surface enough to wet the area and start cleaning the grout with a medium

    density sponge in a circular motion all over the joints. Finish the joint smoothly and evenly. (Change the water once or twice to have proper cleaning of the surface). The sponge cleaning will ensure the grout leaves a smooth and glossy finish at the joints.

  • Leave the grout for 24 hrs. to dry and fully set. Protect the area for any possible stain on fresh grout due to movement or dust.

  • After 24 hrs. the tile surface can be cleaned with soap water to remove any haze or traces of colour remaining at the top.

  • Advance technology ready to use epoxy base crystal grout in jewels form, which requires a very short time for mixing and application.

  • User friendly 2 component formulation and cleaning can be done in a short time with water only.

  • High-quality shiny jewels joints for decorative & aesthetic appeal.

  • Weathering free and long-lasting metallic effect.

  • Fully flush joints equal to the surface of tiles or stone.

  • Highly suitable for all types of ceramic, vitrified, marble granite & glass mosaic surfaces.

  • Saves time and labour significantly compare to the other 3 component grouts.

  • Highly thixotropic in nature and does not sag from the joint up to 10 mm. or even more.

  • Low VOC (Volatile Organic Compound) and at par with international norms.

  • Cleaning and final finish possible with only normal water.

  • Hygiene, is antibacterial & does not allow fungal growth by itself.

  • High quality extra shiny polyester glitter in Gold, Silver & Copper.

  • It is able to lock grout colours between joints permanently.

  • Almost waterproof by its nature.

  • Very high compressive strength and no debonding from joint.

  • Durable and long-lasting.

Technical Performances and working data

In compliance with EN: RG (Reactive grouts)

Compressive strength : >: 54 MPa as per EN 13888

Abrasion resistance: <162 mm3 as per EN 12808-2

Water absorption after 240 min. : <0.03g as per EN 12808-5

Porcelain tiles/concrete tensile strength : ≥ 3 Mpa as per EN 1348

(Using as adhesive)

Fungal contamination: NIL

Bacterial contamination: NIL

(Final Result Data @ 28 days test. 23° C & 50% humidity)

Keep in Touch

Get in touch for business and product acquisitions enquiries.

For Enquiries
91-22-49713322
91-9967007783

Email
info@wallnut.co.in

 

Web Enquiry
wallnut footer