Calcibond

Calcibond Smart Plus

Adhesive for fixing small size vitrified tiles in interior
and all types of absorbent ceramic & porcelain tiles

4

Available in

WEIGHT
  • 40

    KG

  • 20

    KG

  • 00

    KG

COLOR

  • check

  • check

PACK

  • check

Product Coverage Calculation
Download Technical Datasheet

Admix for mortar
In Compliance With
European norms - EN C2 TE, IS TYPE 2 T

Calcibond Smart Plus is an Eco friendly, high polymer modified, lightweight, based on high-quality minerals, ready to use adhesive for fixing small size vitrified tiles in the interior, and all types of absorbent ceramic, porcelain, glazed and other tiles in the interior & exterior.

Hi-Tech Features

Wallnut High Grip Technology
Low Voc
No Water Curing
  • Exceed strength of class 1 adhesive as per European norms.
  • The first adhesive in class 1 category with improved tensile adhesion to fix small size vitrified tiles in the interior area.
  • Guaranteed fixing for all types and sizes of absorbent ceramic tiles & mosaic.
  • Very low VOC and suitable for green building. Light weight
  • No water curing is required.
  • No need to mix any extra cement or sand. Ready to use.
Polymer modified
Wallnut application thickness
covergae
  • High polymer modified for improved strength & working.
  • Fully thixotropic for ease of application on the wall with big format tiles.
  • Absorbent porcelain tiles of big size on the wall can be fixed with ease in areas such as bathrooms, lobby etc.
  • Minimum thickness of 3 mm. and a maximum of up to 10mm.
  • High speed of work with ease of application.
  • High coverages
  • Very high mineral content.

Best suitable areas for Calcibond Smart Plus

Internal & External Walls and Fllors

Residential & commercial buildings.

How to use Calcibond Smart Plus

Suitable surfaces
Suitable covering material
Surface Preparation
Mixing
How to apply
  • Fully dry and sound new or old traditional plaster.
  • New or old absorbent IPS or PCC floors which are sound and stable.
  • Absorbent concrete.
  • Traditional cement: sand screed or screed made with Zeorich Base or similar type.
  • All types of absorbent ceramic & porcelain tiles.
  • Small size vitrified tiles in interior.
  • Small size stable natural marble in interior floor.
  • Large format absorbent tiles on wall.
  • Ceramic mosaic.
  • Ensure that plaster / screed surface is sound, clean and free from all foreign material such as oil, grease, dust etc.
  • If surface is uneven of more than 10 mm. than first do the levelling by using correct levelling material in order to avoid
  • using the excess thickness of adhesive or apply the first thin coat of same adhesive to level the surface and wait for 24 hours.
  • Onto dry clean surface, splash the enough water and let it surface dry to improve the workability of adhesive.
  • In case working in external environment, avoid direct sun exposure to surface and to finishing material. Let cool the
  • surface before starting application. Hot surface may compromise final performance.
  • If surface area is larger, provide movement joint every 3 meters or as per local standard.
  • Follow concrete expansion joint and connection joint as per standard.
  • Mix Calcibond Smart Plus 20 kg. grey bag with approx. 5.25 lt. and white with 5.5 lt. of clean water. Use slow speed electric stirrer to have desire results. Manual mixing can compromise the performance of adhesive.
  • Adjust the water quantity as per ambient temperature and dryness of surface. The final mix must be workable paste.
  • Spread the adhesive in desire thickness from 3 to 10 mm. onto cement surface using proper notch trowel.
  • Once adhesive is applied, fix the tiles or stone onto adhesive before skin formation and press firmly. In case tiles or
  • stone is of big size, also apply the adhesive layer at the back of tiles.
  • Leave the space between tiles to have proper grouting and to accommodate surface movement.
  • Leave the tiles for 24 hours to bond well and then follow the grouting process.
TECHNICAL DATA

In compliance with EN 12004: EN C1 TE standard for class 1 adhesive

Tensile adhesion (Vitrified Tiles)      ≥ 1.0 N / mm2              As per EN 1348 
Adhesion after a heat cycle              ≥ 0.70 N / mm2           As per EN 1348
Adhesion after water immersion      ≥ 0.9 N / mm2             As per EN 1348
Adhesion after freeze/thaw cycle    ≥ 0.65 N / mm2           As per EN 1348

                                             (Final results @ 28 days. 23° C. & 50% humidity)

In compliance with IS 15477-2019: for Type 2 Adhesive

Tensile Adhesion (Dry condition)  : ≥ 1 N/mm2
Sheer Adhesion (Dry Condition)   : ≥ 1.25 N/mm2

                                           (Final results @ 28 days. 27° C. & 65% humidity)

Smart Plus

Keep in Touch

Get in touch for business and product acquisitions enquiries.

For Enquiries
91-22-49713322
91-9967007783

Email
info@wallnut.co.in

 

Web Enquiry
wallnut footer