Lite Block

AAC block Adhesive for fixing of concrete block & fly ash bricks, etc.

Lighter AAC Block needs, Stronger Bonding Adhesive "

Wallnut Lite Block adhesive is designed for doing work with speed and ease. Lite Block adhesive must be mixed with water in order to obtain a smooth working paste to apply on the surface of the block or bricks in the thickness of a minimum of 2 mm. & maximum 6mm.

lite block

Available in

WEIGHT
  • 40

    KG

  • 00

    KG

  • 00

    KG

COLOR

  • check

PACK

  • check

Product Coverage Calculation
Download Technical datasheet

Adhesive Advantages over cement or traditional jointing mortar

AAC block adhesive

In Compliance With
European Norms 

AAC Lite block adhesive is an Eco friendly, lightweight, polymer-modified, mineral-based ready-to-use adhesive for fixing all kinds of AAC (Autoclaved Aerated Concrete) blocks, concrete blocks, fly ash bricks, and other absorbent blocks and bricks.

Lite Block Hi-Tech Features

Wallnut High Grip Technology
covergae
  • High strength once fully dry and can be used up to full room height for fixing of AAC  blocks. 
  • AAC Lite Block is adhesive for guaranteed fixing of all kinds of AAC block, absorbent brick, and concrete block.
  • Very high coverage compares to conventional block jointing mortar
  • Exceed strength of class one adhesive as per IS norms.
  • Perform with a minimum thickness of 2 mm. can be used till 6 mm.
No Water Curing
Low Voc
  • No water curing is required.
  • Saves time & labour.
  • Easy spread and creamy workability.
  • Very low VOC and suitable for green building credit points.
  • No need to mix any extra cement.

Best Suitable Areas for Lite Block

Internal and External Areas

Industrial Construction

Residential and Commercial construction

How to use Lite Block

Suitable surfaces
Suitable covering material
Surface Preparation
Mixing
How to apply
  • New or old fully cured absorbent plasters. 
  • New or old fully cured absorbent concrete, IPS, or PCC floors which are sound and stable.
  • AAC Lite block (Autoclaved Aerated Concrete)
  • Concrete block, Hollow concrete blocks.
  • Absorbent machine cut bricks, fly ash bricks, etc.
  • Ensure that the base surface such as screed/plaster on which product to be applied are sound, clean and free from all foreign material such as oil, grease, dust, etc. 
  • Ensure that AAC block or brick is clean and free from dust.
  • Before applying the AAC block adhesive onto the block surface, splash the water and let it surface dry to improve the workability of the adhesive.
  • Follow the concrete expansion joint and connection joint as per standard.
  • Mix Wallnut Lite Block 40 kg. bag of powder with approx. 10 lt. of clean water. Use an electric low-speed stirrer to have desirable results. Manual mixing can compromise the performance of AAC block adhesive. 
  • Adjust the water quantity as per ambient temperature. The final mix must be a workable paste.
  • Moist the surface of the block with water before applying the adhesive. Once the surface is moist, spread the adhesive onto the surface of the block with help of a notched trowel in the thickness of 2-3 mm. or as needed.
  • Once AAC block adhesive is applied, fix the blocks onto adhesive before skin formation and press firmly. In case adhesive dries too fast due to surface absorption of the block and windy surround, then apply at a time in small areas of the block surface.
  • Leave appropriate space between the concrete walls and blocks to accommodate surface movement. Fill the joint with the correct sealant or flexible material.
  • Once AAC block adhesive is fully cured, apply the plaster or any other covering.
Technical Performances & Working Data

In compliance with EN norms 12004

Tensile adhesion (porous surface):  1.0 N / mm2:  As per EN 1348

Tensile Adhesion after heat cycle: 0.55 N / mm2: As per EN 1348

Tensile Adhesion after water immersion: 0.66 N / mm2: As per EN 1348

Tensile Adhesion after Freeze-thaw cycle: 0.52 N / mm2: As per EN 1348

(Final results @ 28 days. 23° C. & 50% humidity)

In compliance with IS 15477-2019: for Type 1 Adhesive

Tensile Adhesion (Dry condition) : ≥ 1.0 N/mm2

Sheer Adhesion (Dry Condition) : ≥ 1.2 N/mm2

(Final results @ 28 days. 27° C. & 65% humidity)

Keep in Touch

Get in touch for business and product acquisitions enquiries.

For Enquiries
91-22-49713322
91-9967007783

Email
info@wallnut.co.in

 

Web Enquiry
wallnut footer