Lite Tile Pro Adhesive

All type of absorbent ceramic, glazed tiles.

Small and mid-size vitrified tiles on floor and wall.

Stable Indian marble stone which is not sensitive to moisture.

Ensure that plaster / screed surface is sound, clean and free from all foreign material such as oil, grease, dust etc.

If surface is uneven of more than 10 mm. than first do the leveling by using correct leveling material in order to avoid using excess thickness of adhesive or apply first thin coat of same adhesive to level the surface and wait for 24 hours.

Onto dry clean surface, splash the enough water and let it surface dry to improve the workability of adhesive.

In case working in humid or hot environment, let cool the surface before starting application and sprinkle enough water before starting application. Hot surface may compromise final performance.

If surface area is larger, provide movement joint every 3 meters.

Follow concrete expansion joint and connection joint as per standard.

Mix Lite Tile Pro 20 kg. grey or white product bag with approx. 4.5 to 5 lt. of clean water based on uses on wall or floor.

Use slow speed electric stirrer to have desire results. Manual mixing can compromise performance of adhesive.

Adjust the water quantity as per ambient temperature and dryness of surface. The final mix must be workable paste.

Spread the adhesive in desire thickness from 3 to 10 mm. onto cement surface using proper notch trowel.

Once adhesive is applied, fix the tiles or stone onto adhesive before skin formation and press firmly. In case tiles or stone are of big size, also apply the adhesive layer at the back of tiles.

Use minimum 2 mm. spacer between tile joint to accommodate surface and tiles / stone movement.

Leave the tiles for 24 hours to bond well and then follow the grouting process.