Max

Residential & commercial buildings.

Industrial work.

Maintenance work of epoxy coating.

Under construction job site.

After epoxy grouting in tiles or stone joint. (Cover the epoxy grout with masking)

The area which is to be cleaned ensures that no other materials or surfaces are exposed which are delicate (Wood, metal or carpet etc.) to strong solutions. The delicate expose surface can be covered with a plastic protection sheet or any other material.

While cleaning the haze of Epoxy Grouting work from tile or stone surfaces, ensure that the product is not applied directly on grout and that all joints are protected before the start of the application.

Shake the bottle/container well before using.

Zeoclean Max Epoxy Film Remover is ready to use and no mixing require with any other product. Mixing with any other product or solution may result in bad final performance or results

Spread the solutions onto the affected surface area directly with a sponge or brush. Apply enough to cover the affected surface with the solution. The waiting period can be 10 to 15 minutes or more depending upon how thick the film/haze is bonded to the surface.

Repeat the application if the film/haze has not been removed completely in the first application.

Final cleaning of the surface can be done with normal water or wiping the surface completely with a dry cloth.