C2 E grade economy adhesive specifically for vitrified floor tiles — enhanced non-slip and extended open time for comfortable floor installation at a value price point.
What Makes Floor
Stand Out
C2 E grade economy adhesive specifically for vitrified floor tiles — enhanced non-slip and extended open time for comfortable floor installation at a value price point.
C2 E classification — enhanced adhesion and extended open time specifically for floor vitrified tile applications.
Formulated to hold tiles in place during installation — prevents tiles sliding after placement.
E class extended open time — more working time on large floor areas before the adhesive skins over.
Enhanced bond for the challenging surface of vitrified and polished tiles — consistent contact.
Extended open time makes Lite Floor ideal for large area floor installations.
Achieves C2 E floor performance at economy pricing — best value floor adhesive in residential market.
Suitable for all residential and light commercial floor applications.
Polymer-modified formula provides improved bond strength and water resistance vs basic OPC mortars.
Technologies
Engineered specifically for floor vitrified tile applications
Extended open time for large floor areas
Prevents tile movement after placement on floors
C2 grade performance at Lite economy price
Where Floor Performs
Standard vitrified floor tile installation in all rooms
All domestic floor tiling — kitchen, bathroom, living areas
Office, retail and light commercial floor tiling
Floor tile renovation and replacement
Large residential housing development floor tiling
School, hospital and institutional floor tiling
How to Use Floor
- Vitrified and polished vitrified floor tiles up to 600×600mm
- Full-body porcelain floor tiles
- Glazed vitrified tiles (GVT) on floors
- Standard ceramic floor tiles
- Concrete or screed floor — clean, dry, flat
- Do not lay on damp or green screed
- Ensure flatness — max 5mm deviation over 2m
- Do not pre-wet the floor substrate
- Add powder to clean water at W/P ~0.30
- Mix to smooth, workable consistency with no lumps
- Slake 5 minutes and re-stir before use
- Use within 2-hour pot life
- Use notch trowel appropriate to tile size — minimum 6mm for 400mm tiles
- Spread adhesive in one direction for best coverage
- Lay tiles within extended open time — check coverage by lifting a tile
- Minimum 65% coverage on all floor tiles
- Allow 24 hours before grouting floor tiles
- Use C&L Lite Grout or C&L Epoxy Grout for wet areas
- Do not allow heavy traffic before 24 hours
Ideal working temperature +5°C to +35°C. Avoid direct sunlight and extreme temperatures during application.
Always ensure the substrate is clean, dry and structurally sound before application.
Lift a tile to verify adhesive coverage — minimum 65% floor, 80% exterior and wet areas.
Mix only what can be used within the pot life. Do not add water to extend working time.
For floor use only — not suitable as wall adhesive for large format tiles. For tiles over 600×600mm, upgrade to Calcibond Secure or Flex.
Technical Data
Coverage varies with substrate condition, tile format and application method. Use our Product Calculator for exact estimates per project.
🧮 Open Calculator →More from Lite Series
WallUse Lite Tile for wall tile applications in the same economy range
View Product →
PlusLite Tile Plus for improved wall tile adhesion with sag resistance
View Product →
GroutReady to Build
with the Best?
Download the Technical Data Sheet, use our product calculator, or speak to our technical team for project-specific advice.